| Model | Hantek6022BE | Hantek6052BE | Hantek6082BE | Hantek6102BE | Hantek6212BE |
| Channel | 2 Channels | ||||
| Bandwidth | 20MHz | 50MHz | 80MHz | 100MHz | 200MHz |
| Input Impedance | 1MΩ 25pF | ||||
| Max. Sample rate | 48MS/s | 150MS/s | 250MS/s | 250MS/s | 250MS/s |
| Coupling | DC | AC/DC/GND | |||
| Vertical resolution | 8Bit | ||||
| Gain range | 20mV-5V | 10mV-5V | |||
| DC accuracy | ±3% | ||||
| Timebase range | 4ns-5ks | ||||
| Vertical adjustable | Yes | ||||
| Input protection | Diode clamping | ||||
| X-Y | Yes | ||||
| EXT. input | No | Yes | |||
| Trigger Mode | Auto, Normal and Single | ||||
| Trigger Slope | +/- | ||||
| Trigger level adjustable | Yes | ||||
| Trigger Type | Rising edge, falling edge | ||||
| Trigger Source | CH1, CH2 | CH1, CH2, EXT | |||
| Pre/Post trigger | 0-100% | ||||
| Buffer size | 1M | 10K-64KB/Channel | |||
| Sampling selection | Yes | ||||
| Waveform Display | port/line, waveform average, persistence, intensity | ||||
| Network | Open/Close | ||||
| Vertical mode | CH1, CH2, Dual, ADD | ||||
| Cursor measurement | Yes | ||||
| Math | FFT, addition, subtraction, multiplication, division. | ||||
| Cursor | Frequency, Voltage | ||||
| Accessories | S/W CD, probes, manual, USB cord | ||||
Hantek 6022be Setup Windows10 Driver
Attached information Application software Driver User's manual The latest firmware SDK. Hantek365 Driver. Hantek365 Driver. DSO1000E Driver. DSO8000E Driver. HT6022BL Driver. PPS1004A Driver. Company Profile; Awards Received. On the driver side, I pulled a lot of the stupid Hantek behavior out; the original Hantek driver will try to clear the FIFO on every read, which means you always will lose data, and waste USB bandwidth. The stock driver also did everything synchronously and did not queue up bulk transfers, leading to more data loss and poorer use of bandwidth.