PRO-TECH URETHANE P-2.8 is a two-part system designed for roofing applications where the compressive strength (55 psi) provides a greater resistance to foam fracture than is offered by foams of lower density. PRO-TECH Urethane P-2.8 has been formulated with HFC 245 FA as the blowing agent.

TechGuard Cementitous Topped Urethane P 2.8 is a two part system designed for roofing applications where the compressive strength (54 psi) provides a greater resistance to foam fracture than is offered by foams of lower density. The foam is coated with EC- 100 usually in two to three coats at a rate of 1 ¼ gallons per 100 square feet per coat. A crushed #6 limestone is applied to all flat areas in the wet final acrylic elastomer coating at approximately 60 lbs. per 100 square feet. Finally an acrylic modified cementitous top coat is spray applied in two coats achieving a total of 7 to 8 gallons per 100 square feet to all flat areas and allowed to dry.

A-P Primer is a low solids water-based 100% acrylic primer designed to properly prepare a variety of roofing substrates prior to the installation of spray polyurethane foam and acrylic elastomeric topcoats. This cost effective primer has outstanding adhesion qualities and is also effective in cooler climate conditions for creating heat gain into substrates to maximize yield of spray polyurethane foam.

EC-50 NR (Non Rated) is a cost effective 100% acrylic elastomeric water-based coating designed specifically for use over new polyurethane foam roofing systems. This durable 100% acrylic coating possesses excellent dirt pick-up resistance and outstanding adhesion, weatherability, ultraviolet and good ponded water resistance over sprayed-in-place polyurethane foam surfaces.

EC-100 is a premium grade 100% acrylic elastomeric water-based coating designed specifically for use over new polyurethane foam roofing systems. This durable 100% acrylic coating possesses excellent dirt pick-up resistance and outstanding adhesion, weatherability and good ponded water resistance over sprayed-inplace polyurethane foam surfaces.

Pro-Tech Cleaning Concentrate is a 100% biodegradable cleaning agent diluted at a 10:1 ratio with water to effectively remove dirt and other surface contaminates from a variety of existing surfaces. This environmentally safe cleaning agent will not harm animal life, ground vegetation or its inhabitants.

Pro-White is a premium grade 100% acrylic elastomeric water-based high tensile coating designed specifically for use over new polyurethane foam roofing systems. This durable 100% high tensile acrylic coating combines abrasion and hail resistance along with excellent dirt pick-up resistance, outstanding adhesion, weatherability, ultraviolet and
good ponded water resistance over spayed-in-place polyurethane foam surfaces.

Superiorseal Topcoat is a high quality co-polymer acrylic elastomeric water-based coating designed for use over various new and existing roofing substrates. This quality elastomeric coating is a durable, long lasting, ultraviolet resistant topcoat with good dirt pick up resistance.

Super Putty is a premium grade acrylic elastomeric water-based compound which combines acrylic polymers with high solids content. This durable acrylic patching compound has outstanding adhesion, elongation, and weatherability and can be applied to a variety of roofing surfaces.

Ultrashield Topcoat is a cost effective co-polymer acrylic elastomeric water-based coating designed for use over various new and existing roofing substrates. This low cost alternative elastomeric coating is a durable, yet ultraviolet resistant topcoat with good weatherability.

TIETEX is a stitch-bonded polyester used to help fill in low spots and indentations in the roof. Stitch-bonding offers a rare combination of high strength properties with good elongation for outstanding thermal pressure force accommodations.

Modified Asphalt Primer is an acrylic modified asphalt primer designed for use over various existing roofing substrates. This cost effective primer has outstanding adhesion characteristics.